The following is list of some of key the 780AH standard features and benefits. Please refer to the 780AH Data Sheet for a list of all 780AH features and benefits.

Battery powered / small form factor – The small size, battery power and operation through the embedded touch screen make the 780AH convenient to use in all applications, in the field, on your test bench or in the R&D lab.

HDMI Out (Tx) port – Supports the emulation a known-good HDMI source device up to 300 MHz to test HDMI sinks and downstream HDMI networks including HDMI 2.0 sinks with 4:2:0 pixel encoding.

HDMI protocol Tests - Verify EDIDs and HDCP authentication (1.4 or 2.2) on HDMI sources, sinks or repeaters. View incoming HDMI infoframes from source devices.

Extensive format and test pattern library – Enables you to test a variety of video test cases on a high end HDTV including deep color and 3D.

Audio test tones and clips for uncompressed LPCM and compressed formats – Enables you to verify that an HDMI audio rendering device supports various audio formats including LPCM and Dolby and DTS compressed formats including Dolby TrueHD and DTS Master Audio.

HDMI In (Rx) port – Supports the emulation a known-good HDMI sink device to test HDMI sources and upstream HDMI networks including HDMI 2.0 sinks with 4:2:0 pixel encoding.

Installer tests Enable you to quickly diagnose HDMI interoperability problems through an automated and simplified interface. Run tests upstream toward the source, downstream toward the sink or test both upstream and downstream simultaneously with the “Link” test. The utility also enables you to test on both sides of a repeater.

NEW! Report File Creation. Enables residential installers, proAV integrators and test engineers in R&D to produce a record of the tests they perform.  Reports can be run on HDCP, Format Analyzer, Audio Analyzer, Cable tests, auxiliary channel analyzer tests for any interface type. The reports can be provided to customers, colleagues or to the contracting agent to verify and demonstrate project completion. The reports can be run on a single test or aggregated for a series of tests. The reports can be transferred by SD card or the USB interface and viewed in a standard browser or any text editor.

The following is list of some of key the 780AH optional features.

NEW! Report File Creation. Enables residential installers, proAV integrators and test engineers in R&D to produce a record of the tests they perform.  Reports can be run on HDCP, Format Analyzer, Audio Analyzer, Cable tests, auxiliary channel analyzer tests for any interface type. The reports can be provided to customers, colleagues or to the contracting agent to verify and demonstrate project completion. The reports can be run on a single test or aggregated for a series of tests. The reports can be transferred by SD card or the USB interface and viewed in a standard browser or any text editor.

Network Analyzer – Enables you to run diagnostic tests to verify proper timing, infoframes metadata, HDCP authentication, EDID structure and content and CEC messages on HDMI sources, sinks and entire HDMI distribution networks.

HDMI Cable and Link Test – Enables you to run functional tests on HDMI cables and HDMI distribution devices and networks.

Auxiliary Channel Analyzer (ACA) – Monitoring when emulating HDMI source or sink – Monitor the HDCP and EDID transactions on the DDC and also monitor hot plug related events while the 780AH is emulating a known-good source device, a known-good display device or both.

Auxiliary Channel Analyzer (ACA) – Passive Monitoring – Monitor the HDCP and EDID transactions on the DDC and also monitor hot plug related events while the 780AH is passively monitoring and HDMI system comprised of multiple devices. Requires an additional hardware module with four (4) additional HDMI ports.

THX Test Pattern Pack – The THX test patterns enable A/V professionals to calibrate the displays on high-end 3D-capable HDTVs to match the same standards as those used in post-production facilities worldwide.

Imaging Science Foundation (ISF) Test Pattern Pack – The ISF test patterns enable A/V professionals to calibrate the displays on modern high-end HDTVs.

China Res Test Pattern Package – The ChinaRes test pattern is specified by the National Testing and Inspection Center for Radio and TV Products of China. The image pack includes both a standard definition aspect ratio (shown right) and a high definition aspect ratio. This test pattern is supported at: 1920×1080, 1280×720, 720×576 and 720×480 resolutions.

The following is a list of some of important specifications of the 780AH. Please refer to the 780AH Data Sheet for a list of all specifications.

Interfaces

• 780AH HDMI Tx – Connector: Type A; Pixel rate: Up to 300 MHz; TMDS rate: up to 225 MHz with deep color. Video Type/Sampling: RGB/YCbCr 4:4:4, 4:2:2, 4:2:0 24/30/36 bit color; Colorimetry: ITU-R BT.601-5, ITU-R BT.709-5.
• 780AH HDMI Rx – Connector: Type A; Pixel rate: Up to 300 MHz.
• VGA – Connector: HD15F; Pixel rate: up to 80 MHz with higher rates using pixel repetition. Provides RGB video and analog component YPbPr video.

Operation

• Embedded touch screen –  Screen size: 480 x 272 resolution; 24 bit RGB color.
• USB – Serial command line through terminal emulation program.

Physical

• Power (Battery) – DC 6AA NiMh batteries; 2 hours battery life on an overnight charge.
• Power (AC) – VAC 100 to 240VAC; Power: 24 VA; Frequency: 47 – 63Hz.
• Dimensions – Height 2.7 inches (6.98 cm); Width: 9.75 inches (24.76 cm); Depth: 6 inches (15.24 cm).
• Weight – 3.25 LBS (1.47 Kg).
• Environmental – Humidity: 30% – 80% RH non-condensing; Operating Temp: 32 – 104 F (0 – 40 C).

Standard cables – The following cables are provided with the 780 series test instruments:

• Power Line Cord (p/n 30A00400A03) – The 6 foot line cord is a detachable power cord used to provide power to the generator.
• 12V DC (40W) Power Supply / Adaptor / Charger (p/n 25-00106) – The 12V AC/DC adaptor is used to power the 780.
• HDMI to HDMI cable (p/n 30-00146) – The 6 foot HDMI to HDMI cable is used to connect the video generator’s HDMI output ports to an HDTV’s HDMI input.
• VGA to VGA cable (p/n 30-00181) – The 6 foot VGA to VGA cable used to connect the generator VGA connector to the VGA connector on the computer monitor from the generator’s HDMI output connector.
• VGA to HDTV adapter (p/n 99-00203) – The 0.5 foot VGA to HDTV adaptor cable is used to connect a VGA cable from the generator to a TV monitor with RCA connectors.
• RCA SPDIF cable (p/n 30-00185) – The 6 foot SPDIF cable used to connect the video generator’s SPDIF output to an HDTV’s or A/V Receiver’s SPDIF input.
• Optical TOS cable (p/n 30-00186)) – The 6 foot Optical cable used to connect the Optical output to an HDTV’s or A/V Receiver’s Optical input.
• USB cable (p/n 30-00163) – The 3 foot USB cable used to connect the 708 peripheral USB connector a PCs Host USB connector.

The optional accessories – The following accessories are available for the 780 series test instruments:

• Null Modem (p/n 30-00124) – The null modem cable is used for connecting a PC to the generator to control the generator through the command line interface.
• ESD-2 (00-00189) – Provides external ESD protection for HDMI connectors.
• Remote keypad (00-00123) – Allow entry of numeric command to load images and formats from up to 43″ (1.1 m) from the generator.