The 802BT provides the following features:

• DTV signal capabilityy – Pre-programmed standard DTV formats are ready for immediate use. Digital outputs support YCbCr color encoding. Analog outputs support tri-level composite sync and YPbPr.
• 200MHz analogy – Analog component output offers 200MHz pixel rate.
• Programmable video settings – Select RGB, YPbPr video type and sampling.
• Self-calibrating – Analog video outputs are automatically adjusted against an internal precision reference. This assures video levels that are precise and reliable. Signal levels are auto-adjusted individually.
• RS-232 Interface – Industry standard serial interface.
• Built-in formats – Over 250 popular video formats are built-in including VESA, ATSC, EIA-770.x, SMPTE 170, 240, 267, 274, 293, 295, 296, Australian, EIA/CEA-861D, NTSC, NTSC-J, NTSC-443, PAL, PAL-60, and PAL-N.
• Library of common test patterns – Over 300 built-in test images let you accurately adjust a display or projector to the same accuracy as the original factory settings. Images test color, size, linearity, convergence, focus, persistence and more.
• 24-bit pixel depth – 8 bit per component color depth.

The 802BT-CASS provides the following options:

• TV option.
• With CVBS and S-video outputs.
• LVDS.
• Supports OpenLDI LVDS up to 224 MHz.
• OPTF16 Option.
• 2V swing on analog output.
• IEEE-488.
• GPIB (IEEE-488) interface.
• BNC.
• Component outputs (VS, HS/CS, B, G, R)

The following is a list of some of important specifications of the 802BT. Please refer to the 802BT Data Sheet for a list of all specifications.

HDMI

• Connector – One HDMI Type A.
• TMDS – Single link up to 165MHz character rate.

Analog Component Video Output

• Connectors – One HD-15 D-Sub (VGA Type) @ 75 ohms; Five BNC RGBHV @ 75 ohms
• Video levels – Video Swing: 0-1000mV; Sync Swing: 0-400mV; Video Setup: 0-100 IRE

Analog Composite Video Output (CVBS)

• Connector – One BNC @ 75 ohms
• Encoding – NTSC, PAL
• Video Swing – 700mV, adjustable 0 – 1000mV
• Sync Swing – 300m, adjustable 0 – 400mV

EGA Video Output

• Connector – One BNC @ 75 ohms
• Signals – Digital TTL RrGgBb

General Specs

• Power (AC) – VAC: 90 to 264VAC; Frequency: 47 – 63Hz
• Dimensions – Height 3.8 inches (99 mm); Width: 12.2 inches (310 mm); Depth: 7.7 inches (196 mm)
• Weight – 7 LBS (3.2 Kg)
• Operating Temp: 0 – 40 C (0 – 40 C)
• Environmental – Humidity: 30% – 80% RH non-condensing

The 802BT includes the following cables and accessories.

• Null Modem (p/n 30-00124) – The null modem cable is provide with all 880 series generators. It is used for connecting a PC to the generator to control the generator through the command line interface.
• Line Cord (p/n 30A00400A03) – The 6 foot line cord is provided with all 880 series generators. It is a detachable power cord used to provide power to the generator.
• VGA to HDTV adapter (p/n 99-00503) – The 0.5 foot VGA to HDTV adapter cable is provided with all 880 series generators. It is used to connect a VGA cable from the generator to a TV monitor with RCA connectors.
• BNC to RCA adapter (p/n 30-00123) – The BNC to RCA adapter is provided with 880 series generators that have the TV option. It is used on the TV to allow a coaxial cable connection from the TV to the generator’s BNC TV output.
• DVI to HDMI adapter (p/n 30-00145) – The 6 foot DVI to HDMI cable is provided with 880 series generators. It is used to connect the generator to a DVI monitor from the generator’s HDMI output connector.
• HDMI to HDMI cable (p/n 30-00146) – The 6 foot HDMI to HDMI cable is provided with 880 series generators. It is used to connect the generator to an HDMI monitor from the generator’s HDMI output connector.
• VGA HD15(M) to RCA (p/n 30-00147) – The 6 foot VGA to (1)RCA cable is provided with 880 series generators that do not have the HDMI analyzer option. It is used to connect an external digital audio source to the generator’s AV monitoring port.
• VGA HD15(M) to (5)BNC(M) (p/n 30-00141) – The 1.5 foot VGA to (5)BNC(M) cable is an optional cable that has to be ordered separately. It is used to connect a VGA cable to a TV monitor at the BNC connectors.
• VGA HD15(M) to (5)BNC(F) (p/n 30-00142) – The 1.5 foot VGA to (5)BNC(F) cable is an optional cable that has to be ordered separately. It is used to connect a VGA cable to a TV monitor at the BNC connectors.
• ESD-1 (00-00167) – Provides external ESD protection for DVI connectors.
• ESD-2 (00-00189) – Provides external ESD protection for HDMI connectors.
• Compact Flash Memory Card (82-00133 and 82-00134) – 128MB Compact flash memory card.
• Remote keypad (00-00123) – Allow entry of numeric command to load images and formats from up to 43″ (1.1 m) from the generator.