The following is a partial list of features supported by the 882EA-DP Video Generator with Analyzer. For a complete list of features please refer to the Data Sheet and User Guide available at the links on this webpage.

• Test DisplayPort monitors – Use standard test patterns and an extensive library of over 350 video formats including a variety of VESA formats (DMT, CVT, CVR) to test displays.
• Custom video formats – Create custom video formats and timings for testing.
• Custom test patterns – Test displays with bitmap images or create custom test patterns using C++ Software Developer’s Kit (SDK).
• Test audio – Run audio tests on DisplayPort monitors with compressed audio clips or LPCM formats with user-configurable settings for sampling rate, amplitude, bit depth and channels).
• Configurable video format listing – Configure list of video formats based on EDID of connected DisplayPort sink following hot plug.
• HDCP testing – Run basic HDCP functional tests on DisplayPort sink devices.
• EDID testing – Run basic EDID functional tests on DisplayPort sink devices.
• Run basic video tests on DisplayPort sink devices to verify video timing and video parameters.
• Run basic functional tests on DisplayPort source devices, emulate a variety of EDIDs to test a source’s response.
• Easy to use – Access powerful features easily using intuitive user interface.
• Multiple configurations – Save and restore different instrument configurations for different applications.
• Configure various DisplayPort video parameters through front panel or command line.
• Probe Trigger – Trigger a scope or inspection camera using the probe signal. Position a pulse anywhere in the frame.
• Central administration – Update and configure all networked instruments from a single computer.
• Network control – Fully control instrument from any network location with web browser or Telnet client.
• Graphics SDK – Create complex patterns based on your specifications using C++ software development kit.
• Easy to use – Access powerful features easily using intuitive user interface.
• Multiple configurations – Save and restore different instrument configurations for different applications.
• PC Card–Clone one generator to another using a standard CompactFlash card.
• IEEE-488-GPIB – (IEEE-488) command interface.
• RS-232 interface – Industry standard serial interface for command line control.
•  

The Teledyne LeCroy quantumdata 882EA-DP offers the following options:

• DisplayPort Link Layer Sink Compliance test – Industry approved Link Layer compliance test for DisplayPort sink devices.
• DisplayPort Link Layer Source and Sink Compliance test – Industry approved Link Layer compliance test for DisplayPort sink and source devices.
• DisplayPort Aux Channel Analyzer (ACA) utility – Monitor link layer transactions on DisplayPort source and sink devices.
• DisplayPort HDCP 1.2 Sink Compliance test – Industry approved HDCP compliance test for DisplayPort sink devices.
• VESA EDID Compliance Test – Run VESA approved EDID compliance tests on DisplayPort sink devices.

The following is a list of some of important specifications of the 882EA-HDMI instrument. Please refer to the 882EA-HDMI Data Sheets for a list of all features, benefits, options and specifications.

Interfaces

• DisplayPort Tx – Connector: Standard external; Lanes: 1,2,4 (user specified); Lane data rate: 1.62 GB/s, 2.7 Gb/s (user specified); Pixel rates: Up to 268 MHz.
• DisplayPort Rx – Connector: Standard external; Lanes: 1,2,4; Lane data rate: 1.62 GB/s, 2.7 Gb/s; Pixel rates: Up to 268 MHz.
• DisplayPort Tx & Rx ACA ports – Connector: Standard external; used for passively monitoring between a DisplayPort source and sink device.

Operation

• Front panel push button LCD interface: Screen size: 4-line x 80 characters.
• 10/100 BaseT Ethernet (TCP/IP, FTP, Telnet).
• RS-232 – Serial command line for automated control.

Physical

• Power (AC) – VAC 90 to 264VAC; Power: Frequency: 47 – 63Hz.
• Dimensions – Height 3.42 inches (8.70 cm); Width: 13.0 inches (33.0 cm); Depth: 11.20 inches (28.40 cm).
• Weight – 8.62 LBS (3.9 Kg).
• Environmental – Humidity: 30% – 80% RH non-condensing; Operating Temp: 32 – 104 F (0 – 40 C).

• DisplayPort-to-DisplayPort Cable – Connects DisplayPort sources and sinks with standard external (box-to-box) cable.
• Rackmount Kit – For mounting in a standard 19 inch relay rack.
• Null Modem Cable – is provide with all 880 series generators. It is used for connecting a PC to the generator to control the generator through the command line interface.
• Ethernet Crossover Cable (p/n 30-00151) – The Ethernet cross over cable is provide with all 880 series generators. It is used for connecting a PC to the generator for web browser access.
• Line Cord (p/n 30A00400A03) – The 6 foot line cord is provided with all 880 series generators. It is a detachable power cord used to provide power to the generator.
• Compact Flash Memory Card (82-00133 and 82-00134) – 128MB Compact flash memory card.
• Remote keypad (00-00123) – Allow entry of numeric command to load images and formats from up to 43″ (1.1 m) from the generator.