The benefits of compliance testing include:

Pre-Testing MHL CTS version 1.2, 1.3, 2.0 and 2.1 devices approved compliance test solution. Pre-testing prior to submission to the ATC provides a high level of assurance that your MHL product will pass. This reduces the cost and time of having to resubmit if a failure occurs.

Self-Testing MHL CTS version 1.2, 1.3, 2.0 and 2.1 devices approved compliance test solution. Self-testing (where permitted) enables you to avoid submission to the ATC thereby eliminating cost and enabling you to get your MHL device to market more quickly.

No external Test Equipment. No External Test Equipment Provided. All tests including compliance tests for physical layer parameters can be performed with the CBUS compliance test module.

Operational Efficiency. Offers flexibility in running the tests by enabling you to select a small set of tests to run initially. You can save test configurations and recall them for later use to target specific compliance tests.

Root Cause Identification. When compliance test failures occur, you can view the details of the failure. This enables you to quickly identify the root cause of a compliance test failure.

Data Portability. Data portability enables you to share compliance test results with colleagues, subject matter experts at other corporate locations and other experts for analysis and for verifying compliance. The 980 test instrument is not required to view the test results and unique CBUS Event Log Plots. The data can be viewed through the 980 GUI Manager which is free and available from The Teledyne LeCroy quantumdata website.

The following are a list of options available for the MHL CBUS Compliance Test module:

MHL CBUS Source Test – Supports certain tests in Sections 3.1 & 3.2 and all tests in Section 3.3 of the MHL CTS 1.2, 1.3, 2.0 and 2.1.

MHL CBUS Sink Test – Supports certain tests in Sections 4.1 & 4.2 and all tests in Section 4.3 of the MHL CTS 1.2, 1.3, 2.0 and 2.1.

MHL CBUS Source and Sink Tests – certain tests in Sections 3.1 & 3.2 and all tests in Section 3.3 of the MHL CTS 1.2, 1.3, 2.0 and 2.1. Supports certain tests in Sections 4.1 & 4.2 and all tests in Section 4.3 of the MHL CTS 1.2, 1.3, 2.0 and 2.1.

The following are a list of key specifications for the DisplayPort 1.2 Video Generator module. Please refer to the data sheet for a complete list of specifications.

DislayPort Tx Interfaces (2)

• Number of Lanes: 1, 2, 4.
• Link Rates: 1.6Gb/s, 2.7Gb/s, 5.4Gb/s.
• Video Encoding: RGB, YCbCr
• Sampling modes: 4:4:4, 4:2:2.
• Color Depth: 24, 30, 36, & 48 bits per pixel
• Colorimetry: ITU-R BT.601-5, ITU-R BT.709-5.

(optional) DislayPort Rx Interface

• Number of Lanes: 1, 2, 4.
• Link Rates: 1.6Gb/s, 2.7Gb/s, 5.4Gb/s.
• Video Encoding: RGB, YCbCr.
• Sampling modes: 4:4:4, 4:2:2.
• Color Depth: 24, 30, 36, & 48 bits per pixel.
• Colorimetry: ITU-R BT.601-5, ITU-R BT.709-5.

The following is a list of some of important specifications of the 980 HDMI 2.0 Protocol Analyzer module. Please refer to the 980 HDMI 2.0 Protocol Analyzer Data Sheet for a list of all features, benefits, options and specifications.

Interfaces

• HDMI Rx Max TMDS Character rate: Up to 600MHz.
• HDMI Rx Video Encoding/Sampling modes: RGB, YCbCr 4:4:4, 4:2:2, 4:2:0.
• HDMI Rx Color Depth: 24/30/36 bit color.
• HDMI Rx Colorimetry: ITU-R BT.601-5, ITU-R BT.709-5.
• HDMI Rx Audio Formats: LPCM, Dolby (DD, DD+, TrueHD); DTS (ES, HD, Master Audio).
• HDMI Rx Capture memory: 4 GBytes.
• HEAC HDMI Ethernet Channel and Audio Return Channel Connector: RJ-45.