Teledyne LeCroy products provide a variety of compliance test solutions for HDMI. The following products support compliance testing for HDMI products.

• 980 48G Protocol Analyzer / Generator module for HDMI Testing. The 980 48G Protocol Analyzer / Generator module for HDMI Testing provides the deep analysis test features necessary to test the development of your HDMI 2.1 source device at data rates up to 48Gbps. The 980 48G Protocol Analyzer / Generator module is also supports enhanced Audio Return Channel (eARC) Tx & Rx testing. The solution provides emulation of an eARC Tx and Rx functions over the eARC Common Mode data channel. Supports discovery and disconnnect, heartbeat, status and capabilities data structure as well as eARC compliance testing. The module supports the full suite of eARC Tx and Rx compliance tests.  The instrument also support full suite of Fixed Rate Link (FRL) and NEW! Display Stream Compression (DSC) compliance tests for source and sinks.
• M41h 48G Video Analyzer / Generator for HDMI Testing. The M41h 48G Video Analyzer / Generator for HDMI Testing provides the deep analysis test features necessary to test the development of your HDMI 2.1 source device at data rates up to 48Gbps. The M41h is also supports enhanced Audio Return Channel (eARC) Tx & Rx testing. The solution provides emulation of an eARC Tx and Rx functions over the eARC Common Mode data channel. Supports discovery and disconnnect, heartbeat, status and capabilities data structure as well as eARC compliance testing. The module supports the full suite of eARC Tx and Rx compliance tests.  The instrument also support full suite of Fixed Rate Link (FRL) and NEW! Display Stream Compression (DSC) compliance tests for source and sinks.
• 980 HDMI 18G Video Generator module for HDMI Testing. The 980 18G Video Generator module for HDMI Testing supports video and audio and protocol functional testing of HDMI 2.0 sink devices at TMDS characters rates up to 600MHz for testing ultra high definition HDTVs with 4K x 2K resolutions running at 50/60Hz. The 980 HDMI 2.0 Video Generator module also supports industry approved compliance testing for next generation UHD TVs. The module supports HDMI Forum-approved compliance testing for HDMI 2.0 sink tests at pixel rates up to 600MHz and UHD Alliance compliance testing for UHD TVs.
• 980 HDMI 18G Protocol Analyzer / Generator module for HDMI Testing. The 980 18G Protocol Analyzer / Generator module for HDMI Testing supports deep analysis and compliance testing of HDMI 2.0 streams up to 600MHz. The module also supports HDMI 2.0 compliance testing for source devices and UHD Alliance compliance testing for ultra high definition sources. For HDMI the tool provides full visibility into the HDMI metadata, timing data, video data, control and auxiliary data up to 600MHz (HDMI) which supports testing of HDMI 2.0 4K Ultra HD sources at 50/60Hz. The module is also equipped with an HDMI 2.0 transmitter port for testing sink devices. Currently the transmitter port functions are limited and provide only pass-through monitoring of an HDMI 2.0 video stream between a source and sink, pixel error testing of cables and distribution gear or entire distribution networks in loopback mode and capture and playback where an input stream can be captured, stored and then played back.
• 980 HDMI 1.4 Protocol Analyzer module. The 980 HDMI Protocol Analyzer module supports deep analysis of HDMI and MHL streams as well as HDMI and MHL compliance testing for source, sink, repeater/dongle devices. For HDMI the tool provides full visibility into the HDMI protocol, timing, control and auxiliary data up to 300MHz (HDMI) which supports testing of HDMI 2.0 4K Ultra HD sources at 50/60Hz using 4:2:0 pixel encoding. For MHL the module supports analysis of MHL 1.2, 1.3, 1.4, 2.0, 2.1 and 2.2 source devices.
• 980 HDMI Phy & Protocol Aux Channel Analyzer module. The 980 HDMI Phy & Protocol Aux Channel Analyzer module supports compliance testing of the HDMI DDC bus and HDMI 2.0 CEC testing. The module’s CEC compliance tests enable you to identify compliance failures early in the development cycle. The solution is ideal for pre-testing and self-testing (where permitted) your HDMI 2.0 device. The module also supports compliance testing of the HDMI DDC bus voltage and timing parameters in accordance with HDMI 1.4b.

• The 882EA-HDMI Video Generator / Analyzer. The 882EA Video Generator and Analyzer provides HDMI CEC for source and sink devices and HDMI EDID compliance testing of HDMI 1.3 sink devices.

Teledyne LeCroy products provide a variety of compliance test solutions for both HDCP 1.4 and HDCP 2.2/2.3 CTS. The following products support compliance testing for HDCP products.

• 980 9G Protocol Analyzer module. Provides HDCP 1.4 compliance testing for HDMI source devices and HDCP 2.2/2.3 compliance testing on HDMI 2.0 source, sink and repeater devices. The HDMI 2.0 Protocol Analyzer module can be equipped in any of the 980 series Advanced Test Platforms.
• 980 18G Protocol Analyzer / Generator module. Provides HDCP 2.2/2.3 compliance testing for HDMI 2.2 source, sink and repeater devices. The HDMI 2.0 Protocol Analyzer Generator module can be equipped in either of the 980 series Advanced Test Platforms.
• 980 DP 1.4 Video Generator / Analyzer. The module support HDCP 2.2/2.3 compliance testing for DisplayPort source, sink and repeater devices which is approved by Digital Content Protection (DCP). The HDMI 2.0 Protocol Analyzer Generator module can be equipped in either of the 980 series Advanced Test Platforms.
• The 882EA-HDMI Video Generator / Analyzer. The 882EA Video Generator and Analyzer provides industry approved HDCP 1.4 compliance testing for HDMI sources, sinks and repeaters.

Teledyne LeCroy products provide a variety of compliance test solutions for HDMI. The following products support compliance testing for HDMI products.

• 980 HDMI Protocol Analyzer module. Provides compliance testing for MHL 1.2, 1.3, 2.0 & 2.1 source, sink and dongle devices. The HDMI Protocol Analyzer module can be equipped in any of the 980 series Advanced Test Platforms.
• 980 MHL CBUS Compliance module. Provides CBUS compliance testing for MHL source, sink and dongle devices. The MHL CBUS Compliance module can be equipped in any of the 980 series Advanced Test Platforms.

Teledyne LeCroy products provide compliance test solutions for HDBaseT source and sink devices in accordance with CTS 1.0. The following products support compliance testing for HDBaseT products.

• 980 HDMI Protocol Analyzer module. The 980 HDMI Protocol Analyzer module provides industry approved compliance testing for HDBaseT sources, sinks.
• The 882EA-HDMI Video Generator / Analyzer. The 882EA Video Generator and Analyzer provides industry approved compliance testing for HDBaseT sources, sinks.